PPB20

PRESS PATCH BOX

The Press Patch Box is a special kind of audio signal distributor intended for use at press conferences. It features separate inputs for microphone and line signals (from a mixing console output). A high quality input amplifier with a transformer balanced input provides a wide dynamic range. A total of 20 transformer-balanced XLR/m outputs with separate paired driver circuits make it possible to connect up video cameras and other recording equipment. The nominal output level is +4 dBu at 600 Ω. Channels 19 and 20 have TRS jack sockets for balanced/unbalanced signals and also phono sockets (-10 dBu nominal level). Where more than 20 outputs are required,  additional PPB 20s can be hooked up via a rear BUS IN/OUT socket. Signal monitoring is provided by a 10 LED strip displaying a range of -40 to +10 dB (0 dB in the display = 4 dBu output)
and an adjustable headphones amplifier. The PPB20 has an integral, shielded power supply unit. An extra DC input makes it possible to connect up a (backup) battery power source. A PW4 can provide the necessary backup power supply for two PPB20s.

Specifications


INPUT: Transformer-balanced, 4 XLR/f sockets, with paired front/rear parallel connections for separate microphone/line signals.
Nominal input impedances: Microphones = 200 Ω, Line = 5 kΩ
Max. input levels: microphones = 0 dBu, Line = +20 dBu
Max. amplification: microphones = +66 dB, Line = +22 dB (constantly adjustable via switch and potentiometer).
OUTPUT: 20 XLR/m, 2x TRS jack, 2x phono, all transformer-balanced and floating with separate ground lift switches at rear
Nominal output impedances: XLR = 300 Ω, jack and phono = 600 Ω. Nominal output levels: XLR = +4 dBu/20 dBu max.; jack/phono = -10 dBu, + 6 dBu max.
Headphones output: Stereo jack socket, with mono tip + ring, Designed for use with 8 Ω - 200 Ω headphones (constantly adjustable level).
10 LED strips displaying a range of -40 to +10 dB. Bus input/output (mono jack)
POWER SUPPLY: 230 VAC or ± 12 V to ± 18 VDC, 15 Watts.
HOUSING: 19'', 3 U, approx. 200 mm deep.



Setup