PLI DIN Low-Z

The PLI-DIN audio isolating transformers were developed with the special requirements of the installation market in mind. Two high-quality transformers are housed in a standard 70 mm top hat rail case. The connections are made using so-called Phoenix clamps.
There are two different versions of the PLI-DIN: LO-Z with a nominal impedance of 600 Ω : 600 Ω
is optimized for balancing and galvanic isolation of outputs, while HI-Z with 10 kΩ : 10 kΩ is suitable for adapting line inputs.

Specifications

Line-Level Isolating transformer w/3-pin Phoenix-connector For high input impedance 2 channels in a M36 DIN standard -rail housing 4 Mod. 70 mm large
EACH CHANNEL:	Input and Output Impedance nominal 600 Ω. Jumper to connect built in resistor for frequency and phase linearization Ground/shielding connected to all „S-Pins“
FREQUENCY RESPONSE:	30 Hz - 20 kHz: ± 0.3 dB @ 600 Ω source
THD @ +6 dbu/600Ω:	0.5% @ 40 Hz
THD @ +6 dbu/200Ω:	0.35% @ 35 Hz
MAX. INPUT LEVEL:	+20 dBu