PDI 03

The PDI-03 is a passive device that takes the signal from an amp‘s speaker output, and converts it to balanced and unbalanced signals suitable for feeding the input of a mixer, recorder, or power amp. The unit is preset for an 8 Ω load, but can be factory modified for 4 or 16 Ω. You can go direct and use your speaker simultaneously if you choose by using the Thru jack, and there are also four additional unfiltered 1/4“ outputs with a separate level control. Two three-way filter switches allow you to adjust high-end response to simulate „American,“ „British,“ or „bright“ speaker types, and adjust low-end response to simulate closed-back 4x12, „neutral,“ or open-back 2x12 speaker cab sounds.

Specifications

INPUT:	19“ / 1 U passive DI-Box for Loudspeaker Level Integrated Load Box and Filter Section Load Box nom. Input Impedance: 8 Ω, Rating: max Input Power 120 Wrms THRU jack (Speaker signal link) socket with break function disconnecting the internal load box
FILTERED OUTPUT:	1 unbalanced jack socket, 1 balanced XLR/m socket PIN 2 hot, all with floating ground
OUTPUT IMPEDANCE:	Unbalanced 10 kΩ nom. Balanced 600 Ω nom. Outputs via Isolating Transformer, GND switch connecting input/output ground. 4 unbalanced Line Outputs - Output impedance 10 kΩ nom
CONTROLS:	Separate volume controls for filter and line out.
VOICING FILTER:	Low End - Deep, Normal, Flat. High End - Bright, Normal, Mellow.