LANGUAGE: DE | EN | FR | ES
19' Stereo Power Amp for Guitar
19' Stereo Power Amp for Guitar
19' Stereo Power Amp for Guitar
19' Stereo Power Amp for Guitar
19' Stereo Power Amp for Guitar
19' Stereo Power Amp for Guitar
19' Stereo Power Amp for Guitar
19' Stereo Power Amp for Guitar
19' Stereo Power Amp for Guitar
19' Stereo Power Amp for Guitar
19' Stereo Power Amp for Guitar

Model name: PMACHT40219" Stereo Power Amp for Guitar

The Palmer MACHT 402 is a 19" stereo power amplifier specially designed for guitar applications. It pumps out 200 watts per channel and 400 watts bridged to drive virtually all speaker cabinets. Featuring a highly efficient switch mode power supply and low noise fan the soft start class D design is protected against overvoltage, DC, short circuits and overheating.

Conventionally named, the channels' Hi and Low controls have been carefully tailored for guitar signals to provide extensive EQ facility, a wide variety of sounds and authentic tube power stage characteristics. In addition, the MACHT 402 sports rumble filtering, LED indicators, a 3-way sensitivity selector, built-in limiter and ground lift switch. With XLR and 6.35 mm inputs as well as Speakon compatible and 6.35 mm output connectors the Palmer MACHT 402 is the ideal power station for guitar preamps, small amps, modelers and even effects pedals.

Product type:Guitar Amplifiers
Rated ouput power (1kHz (at) 4 Ohms):2 x 200 W
Rated ouput power (1kHz (at) 8 Ohms):2 x 100 W
Rated ouput power (1kHz (at) 8 Ohms, bridged):400 W
Output circuitry:Class D
Frequency response:20 - 20000 Hz
THD:< 0.1 %
Gain:32 dB / 26 dB / 28 dB
Input sensitivity:0,68 V / 1,4 V / 1,2 V
Protection circuits:DC, short circuit, soft start, thermal overload, over-current
Controls:volume, Sensitivity, On / Off, mode, low, limiter, high, ground lift
Indicators:signal, protect (protection circuit engaged), Power, mode, clip
Line inputs:2
Line input connectors:RCA, 6.3 mm Jack
Loudspeaker outputs:2
Speaker output connections:6.3 mm Jack, Speakon compatible
Cooling:low-noise fan
Operating voltage:Switching Power Supply
Power consumption (at) full load:470 W
Operating voltage:115 V AC / 230 V AC (switchable)
Width:482 mm
Height:44 mm
Depth:244 mm
Weight:3.8 kg
Type
Name
Category
File size
All pictures
571,3 KB
User's manual
1,21 MB
Palmer Macht 402 – powerhouse – test report by Gitarre & Bass
Link-
Press: Tube sound without tubes – Palmer Macht 402 Stereo Power Amplifier now available
Link-
Picture 1
Product picture67,2 KB
Picture 2
Product picture64,8 KB
Picture 3
Product picture59,3 KB
Picture 4
Product picture64,9 KB
Picture 5
Product picture95,4 KB
Picture 6
Product picture97,5 KB
Picture 7
Product picture101,4 KB
Picture 8
Product picture104,1 KB
Picture 9
Product picture166,0 KB

PALMER MI MACHT 402 - 19" STEREO POWER AMP FOR GUITAR

No Dealers found? Google it!
© 2017 ADAM HALL GMBH   |   SITEMAP   |   IMPRINT   |   PRESS
PALMER MUSICAL INSTRUMENTS IS A BRAND OF THE ADAM HALL GROUP.
Programming by Artware
>> CLOSE