LANGUAGE: DE | EN | FR | ES
Stereo Speaker Simulator Reissue
Stereo Speaker Simulator Reissue
Stereo Speaker Simulator Reissue
Stereo Speaker Simulator Reissue
Stereo Speaker Simulator Reissue

Model name: PDI05Stereo Speaker Simulator Reissue

With its flexible potential applications, the PDI-05 is equally at home in the studio and home recording as well as onstage, e.g., in the racks of Rush or Def Leppard. Originally developed for the preamp/multieffect/power amp combination popular in the late eighties and nineties, this authentic reissue is also suitable for heads and combo amps. What's more - the precise frequency correction of the stereo speaker simulator turns overdrive and distortion pedals or multieffect units into a genuine preamp with an authentic sound. The PDI 05 lends digital keyboards and drum machines fullness and analogue warmth without complex and time-consuming post-processing at the mixing desk. A built-in headphone amplifier permits "environmentally-friendly" practicing; its high output power even permits direct connection of ordinary hi-fi speakers.

The stereo speaker simulator is active; the power supply is permanently installed. It can also be operated in mono mode and with power amps (in this case, the power amp must always be connected to speakers or a corresponding load, for example the Palmer PDI 06 loadbox).

The PDI-05 makes conventional micing unnecessary and provides for a perfectly isolated signal without interference from other instruments and without feedback. With the reissue, pros and aficionados finally once again have a device at their disposal that has proven itself in more than 20 years of use, onstage and in the studio, around the world.

Product type:Speaker Simulators
Channels:2
Input type:unbalanced
Inputs:2
Input connectors:6.3 mm jack
Output type:balanced, unbalanced
Outputs:2
Output connectors:6.3 mm jack, XLR
Output impedance:10 k (6.3 mm Jack), 600 (XLR) Ohm(s)
Controls:filter volume, ground lift, mains voltage selector, voicing, Power, phones level
Indicators:Power
Dummy load:no
Max. load:200 W
Voicing filter:yes
Power attenuator:no
Transformer isolated outputs:yes
Cabinet material:sheet steel/aluminium
Cabinet surface:powder coated/anodized
Width:480 mm
Width:19"
Depth:180 mm
Height:44.5 mm
Height:1 U
Operating voltage:230 / 115 V AC
Weight:2.9 kg
Type
Name
Category
File size
User's Manual
8,62 MB
All pictures
162,1 KB
Speaker Simulators from Palmer – Everything you need to know
Link-
Picture 1
Product picture57,5 KB
Picture 2
Product picture57,1 KB
Picture 3
Product picture72,9 KB
Picture 4
Product picture80,4 KB
© 2017 ADAM HALL GMBH   |   SITEMAP   |   IMPRINT   |   PRESS
PALMER MUSICAL INSTRUMENTS IS A BRAND OF THE ADAM HALL GROUP.
Programming by Artware
>> CLOSE