PMONICON_1.jpg
enlarge
Passive Monitor Controller
Passive Monitor Controller
Passive Monitor Controller
Passive Monitor Controller
Art.Nr.: PMONICON

MONICON

Passive Monitor Controller

Palmer Monicon, and the volume is right!

With Palmer Monicon, your monitor volume is always under control. The passive mini-mixer with the oversized control is inserted between the stereo output of the notebook, PC or interface and an active monitor system and thus permits convenient and precise volume control of the monitors from the workstation. The passive circuitry with only a few components has absolutely no affect on the sound. Mute and mono buttons make it possible to mute the outputs and merge the stereo output signal into a mono master signal.

The inputs and outputs of the controller are equipped with XLR connectors and the 3.5mm stereo TRS sockets usually found on computers. Combo input sockets also permit connection with 6.3 mm TRS plugs. Thus the Palmer Monicon is compatible with both professional and consumer equipment. Genuine wood sides make the practical studio tool in its massive powder-coated sheet steel housing an elegant looking "little helper" that is a typical Palmer product.

Product type:Sonstiges Studio und Recording Equipment
Channels:1
Inputs:2
Input connectors:3,5 mm Stereoklinke, XLR
Input type:Symmetrisch / Unsymmetrisch in Abhängigkeit des Klinkensteckers
Max. input level:20 dBu
Input impedance:(Symmetrisch) 10k, (Unsymmetrisch) 5k Ohm(s)
Outputs:2
Output connectors:3,5 mm Stereoklinke, XLR
Output type:Symmetrisch / Unsymmetrisch in Abhängigkeit des Klinkensteckers
Max. output level:20 dBu
Output impedance:600 Ohm(s)
Frequency response:10 - 40000 Hz
THD:0,001 %
Max. attenuation:(Attenuator + Mute) 112, (Attenuator) 85 dB
Controls:Attenuation, Mono, Mute
Cabinet material:Holz, Stahlblech
Cabinet surface:pulverbeschichtet
Width:164 mm
Height:62 mm
Depth:85 mm
Weight:0,75 kg

No Dealers found? Google it!
© 2018 Adam Hall GmbH. All rights reserved
Programming by Artware